Quick Start Guide
This guide assumes that you have a working OpenBikeSensor. If you don’t, start here!
In case you might get a OpenBikeSensor, you should do some first steps.
- Check, if your handlebar fits the OpenBikeSensor’s display/button holder. There are basically two different kinds of handlebars: thinner ones, with a 25,4mm diameter and the other ones, with a 31.8mm diameter. You might create some kind of adapter, if the device is designed for 31,8mm and you have a 25,4mm handlebar, but the other way around is not possible
- Measure the distance between the outer edge of the device and the end of your handlebar. Enter these values into the configuration options.
- Set your privacy zones. You could probably get the GPS location with any digital map app. Enter these values into the configuration options.
- Check the SD card, if it’s ok and - in best case - empty.
- Load the device’s battery.
- Turn on your device. Wait until the it has found your GPS location. This might take some time while we’re waiting for the sattelites to connect. The display will exit the status screen as soon as your location is known. While moving it might take up to 15mins, until the devices knows where you are – stand still for a faster process.
- Put your sensor on the bike and go for a ride. Please take care about traffic around you and don’t let the OpenBikeSensor distract you!
- Push the button every time you’re passed (no matter if it’s a car or truck or bus or motorbike). To get some idea how often close passes occur, it’s important to confirm every pass, not only the close ones.
- After your ride, switch off the device. Hold the button on the display while throwing the switch to ensure you don’t lose any data.
Last modified March 23, 2021: Move all files into a merged content directory, distinguish only by extension (f1de249)